Air filter maintenance for small mixer

Post time: 2019-10-25 10:58 Post category:

When the small mixer is running for one day. Users need to effectively clean the entire set of equipment. Especially the mixer. What should the user pay attention to when cleaning the main unit? First, at the end of each day's work, the concrete mixing station must remember to thoroughly clean the mixer. Preferably, the agitator should be cleaned at least once during the curing of the concrete. To prevent material from mixing in the drum. Short-term cleaning during production pauses is more effective than cleaning after each shift. The air filter maintenance of the mixer should start from the following aspects:

  1. In daily work, please empty the dust collector manually. Open the dust bag and remove any accumulated dust.
  2. Specific operation: Unscrew the wing nut and gently remove the main filter of the air filter. When cleaning the paper filter element, gently tap the end face to allow dust to fall. Air is blown from the interior of a stable soil mixing station using compressed air or an air pump. Concrete mixers should be careful not to bring the air nozzle too close to the filter element. To remove dust attached to the outer surface of the filter element. This effectively prevents spattered dust from entering the inner surface of the filter element.
  3. The mixer's engine has been working in a relatively humid place for a long time. Air filter elements are also susceptible to moisture and dust. This results in poor gas permeability, which affects the amount of intake air. Before cleaning the filter element, it can be drained with a light bulb. Then clean it to prevent damage to the filter element.

Our contact information is as follows.

Tel: 0086-371-86238892 | +86 15617732826
Email:[email protected]
Add:Zhengzhou High-tech Industrial Development Zone, Henan Province, P.R.China